12/27/2023 0 Comments Hard disk manager 15 suite torrentOnce done, try to access the hard drive and check if the issue is resolved.Click Actions, then click Rescans Disks.Select the hard drive, which is not accessible.Open the Disk Management by searching it from the Start Menu.In simple words, it refreshes the disk, which might help fix this error. Re-scanning the disk will detect the changes and update the disk information according to changes. You can also try using a Re-scan Disks option if none of the methods has worked. Disconnect and reconnect the hard drive, then check if the error is fixed.Once done, shutdown the computer and open the CPU case.Right-click the drive causing the error, then click Uninstall Device.Right-click the Start Menu and click Device Manager.Remember, after uninstalling the device from the disk management, you will have to open your CPU case to remove and reconnect the drive, as it might not be connected properly, and due to that reason, you might frequently receive this error message. If the error is not fixed yet, another solution you can apply is to uninstall the device via the disk management utility, which might fix this error. Once done, try accessing the drive to check if the error is resolved.Click OK and click Yes when warning popups.Then, change the drive letter from the alphabet dropdown menu Changing Drive Letter.A short Window will open click on the Change button Clicking Change.Then, click Change Drive Letter And Paths.Press the Windows key and type Disk Management.Therefore, try manually changing the drive letter by following the steps below: If that drive letter does not match the one you can see in the disk management utility, the error will likely appear. You can see the drive letter shown in the error message. The mismatching drive letter can lead you to this error message. After giving full control, try accessing the drive to check if the error is fixed.Click on Edit and check the Full Control option under Permissions For Authenticated Users.Click Security from the top bar Navigating to Security.Open the File Explorer and right-click on the drive, which is causing the error.However, To avoid errors, we might need to change the drive permissions as they might not be appropriately configured. Sometimes, we might receive error messages while accessing the drive due to the lack of permissions. However, when we plug an external or internal drive, all the required permissions are set automatically for the user. You cannot access the drive if you do not have appropriate permission. Usually, the error occurs due to insufficient permissions to the drive. Give Appropriate Permission To Access The Drive Hence, checking all the ports one by one is recommended to access data.ġ. Defective USB Ports- If you are using a USB, try changing the port, as it might be defective and prevent you from accessing the data.To fix this, you will need to replace the mother header. Faulty Motherboard Header- If you are using an internal hard disk, there is a chance that your motherboard header is damaged, and thus the error is being triggered.To ensure that you have the latest version of the driver, visit the manufacturer’s website. Outdated Motherboard Chipset Drivers-The error can be a result of outdated chipset drivers.To ensure that, check the drive through another computer if applicable. Hard Disk Issues- The error can also be caused by a hardware issue because there is a possibility of a defective drive causing this error.However, if the drive letter is not assigned correctly, you will not be able to access the drive until you change the drive letter. Mismatching Drive letter- When we connect a drive to a computer, Windows automatically assign a letter to the particular drive.However, in some situations, the drive permission might not be appropriately configured, which might be the reason for this error. Although when you connect an external or internal drive to the computer, all the permissions are automatically set. Not Having Permissions To Access The Device Drive- The error can often be caused by insufficient permissions, causing the error message. ![]() We recommend reading the causes carefully as one of them might be the main contributor in your case: We explained in detail below what could cause this error. However, insufficient permission, mismatching drive letter, and outdated motherboard chipset drivers can also be the leading causes behind this error message. How to Fix A device which does not exist was specified On Windows?Įven though hardware issues like broken USB ports or SATA can cause this error. However, there are some methods that can help you to get rid of this error message. When the error appears, you might not be able to see the basic information about the disk regardless of Windows detecting the drive. You might have seen this error message while accessing the drive in the file explorer.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |